Dd No A-49
Key Takeaway
Dd No A-49 is classified as low hazard in Kansas. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 25 ft (taller than 46.5% in KS) |
| Dam Length | 645 ft |
| Dam Type | Earth |
| Max Storage | 213 acre-ft |
| Normal Storage | 52 acre-ft |
| Surface Area | 11 acres |
| Drainage Area | 1 sq mi |
| Max Discharge | 1,020 cfs |
| Year Modified | 2022 |
| NID ID | KS09208 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
DELAWARE WJD NO 10
Local Government
Nearby Dams
Dam KS00949
Jackson, KS
Low Hazard 26 ftDd No A-47
Nemaha, KS
Low Hazard 29 ftDam KS03123
Jackson, KS
Low Hazard 26 ftDd No A-54
Jackson, KS
Low Hazard 34 ftDam KS00930
Jackson, KS
Low Hazard 22 ftGs Dd No A-40 (Nowlin)
Jackson, KS
Low Hazard 22 ftDam KS03116
Jackson, KS
Low Hazard 26 ftDam KS03110
Jackson, KS
Low Hazard 30 ftFrequently Asked Questions
What is the hazard classification of Dd No A-49?
Dd No A-49 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Dd No A-49?
Dd No A-49 is owned by DELAWARE WJD NO 10 (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Dd No A-49?
Dd No A-49 serves the following purposes: Flood Risk Reduction, Debris Control. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Dd No A-49?
Dd No A-49 has a dam height of 25 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Dd No A-49 last inspected?
Dd No A-49 was last inspected on May 1, 2003. Inspection dates indicate when a formal review occurred, not the results of that inspection.