Davis Brothers
Key Takeaway
Davis Brothers is classified as low hazard in Alabama. It was completed in 1980 and is 46 years old. Its primary use is fish and wildlife pond.
Physical Details
| Dam Height | 17 ft (taller than 44% in AL) |
| Dam Length | 776 ft |
| Dam Type | Earth |
| Max Storage | 254 acre-ft |
| Normal Storage | 159 acre-ft |
| Drainage Area | 1 sq mi |
| Max Discharge | 300 cfs |
| Year Completed | 1980 (46 years old) |
| NID ID | AL02098 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
DAVIS BROTHERS
Private
Nearby Dams
Curtis Hamilton
Hale, AL
Low Hazard 8 ftJoe Glover #1
Hale, AL
Low Hazard 18 ftJoe Glover Dam
Hale, AL
Low Hazard 18 ftTerpin Vise
Hale, AL
Low Hazard 10 ftTerpin Vise
Hale, AL
Low Hazard 12 ftTerpin Vise
Hale, AL
Low Hazard 12 ftTerpin Vise
Hale, AL
Low Hazard 10 ftTerpin Vise
Hale, AL
Low Hazard 12 ftFrequently Asked Questions
What is the hazard classification of Davis Brothers?
Davis Brothers is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Davis Brothers?
Davis Brothers is owned by DAVIS BROTHERS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Davis Brothers built?
Davis Brothers was completed in 1980, making it 46 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Davis Brothers?
Davis Brothers serves the following purposes: Fish And Wildlife Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Davis Brothers?
Davis Brothers has a dam height of 17 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.