Dan Bilton Dam
Key Takeaway
Dan Bilton Dam is classified as high hazard in South Carolina. It was completed in 1980 and is 46 years old. Its primary use is irrigation. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Height | 28 ft (taller than 74.2% in SC) |
| Max Storage | 213 acre-ft |
| Normal Storage | 128 acre-ft |
| Surface Area | 22 acres |
| Year Completed | 1980 (46 years old) |
| NID ID | SC02779 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
CALHOUN CREEK FARMS
Private
Nearby Dams
Walters Pond Dam
Abbeville, SC
High Hazard 23 ftPowell Pond Dam
Abbeville, SC
Low Hazard 23 ftDr Bobby L Crosby Dam
Abbeville, SC
Low Hazard 28 ftHershberger Pond Dam
Abbeville, SC
Low Hazard 28 ftDanny Botts Dam
Abbeville, SC
Low Hazard 23 ftParsons Mtn Dam
Abbeville, SC
Low Hazard 30 ftIvan Block Dam
Abbeville, SC
Low Hazard 25 ftGreenwood West Pond Dam
Abbeville, SC
High Hazard 37 ftFrequently Asked Questions
What is the hazard classification of Dan Bilton Dam?
Dan Bilton Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Dan Bilton Dam?
Dan Bilton Dam is owned by CALHOUN CREEK FARMS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Dan Bilton Dam built?
Dan Bilton Dam was completed in 1980, making it 46 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Dan Bilton Dam?
Dan Bilton Dam serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Dan Bilton Dam?
Dan Bilton Dam has a dam height of 28 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Dan Bilton Dam last inspected?
Dan Bilton Dam was last inspected on May 10, 2023. Inspection dates indicate when a formal review occurred, not the results of that inspection.