Culver Springs Dam

HACKETT CREEK· Beaverhead, Montana· Built 1959· Earth· 9 ft tall
Low Hazard Fish And Wildlife Pond Federal Government

Key Takeaway

Culver Springs Dam is classified as low hazard in Montana. It was completed in 1959 and is 67 years old. Its primary use is fish and wildlife pond.

Physical Details

Dam Height 9 ft (taller than 2.9% in MT)
Dam Length232 ft
Dam TypeEarth
Max Storage461 acre-ft
Normal Storage110 acre-ft
Surface Area65 acres
Drainage Area1 sq mi
Max Discharge128 cfs
Year Completed1959 (67 years old)
NID IDMT03695

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: August 30, 2018
State Regulated: No

Ownership

US FISH AND WILDLIFE SERVICE

Federal Government

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Culver Springs Dam?

Culver Springs Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Culver Springs Dam?

Culver Springs Dam is owned by US FISH AND WILDLIFE SERVICE (Federal Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Culver Springs Dam built?

Culver Springs Dam was completed in 1959, making it 67 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Culver Springs Dam?

Culver Springs Dam serves the following purposes: Fish And Wildlife Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Culver Springs Dam?

Culver Springs Dam has a dam height of 9 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Culver Springs Dam last inspected?

Culver Springs Dam was last inspected on August 30, 2018. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.