Corman Dam
Key Takeaway
Corman Dam is classified as low hazard in Nebraska. It was completed in 1962 and is 64 years old. Its primary use is irrigation.
Physical Details
| Dam Height | 17 ft (taller than 17.6% in NE) |
| Dam Length | 315 ft |
| Dam Type | Earth |
| Max Storage | 97 acre-ft |
| Normal Storage | 39 acre-ft |
| Surface Area | 10 acres |
| Drainage Area | 1 sq mi |
| Max Discharge | 362 cfs |
| Year Completed | 1962 (64 years old) |
| NID ID | NE00223 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Daniel K Corman
Private
Nearby Dams
Bill Hill Dam
Nuckolls, NE
Low Hazard 18 ftGrummert Dam
Nuckolls, NE
Low Hazard 16 ftFrahm Road Dam
Nuckolls, NE
Low Hazard 27 ftSchleufer Dam
Nuckolls, NE
Low Hazard 12 ftHiger Dam
Nuckolls, NE
Low Hazard 26 ftFrahm Dam 1654
Nuckolls, NE
Low Hazard 18 ftGebhards Dam
Nuckolls, NE
Low Hazard 15 ftSchiermeyer Dam
Nuckolls, NE
Low Hazard 23 ftFrequently Asked Questions
What is the hazard classification of Corman Dam?
Corman Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Corman Dam?
Corman Dam is owned by Daniel K Corman (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Corman Dam built?
Corman Dam was completed in 1962, making it 64 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Corman Dam?
Corman Dam serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Corman Dam?
Corman Dam has a dam height of 17 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Corman Dam last inspected?
Corman Dam was last inspected on April 8, 2020. Inspection dates indicate when a formal review occurred, not the results of that inspection.