Clark Lake Dam
Key Takeaway
Clark Lake Dam is classified as low hazard in Georgia. Its primary use is recreation.
Physical Details
| Dam Height | 13 ft (taller than 12.9% in GA) |
| Dam Length | 795 ft |
| Dam Type | Earth |
| Max Storage | 119 acre-ft |
| Normal Storage | 60 acre-ft |
| Surface Area | 12 acres |
| Drainage Area | 99 sq mi |
| NID ID | GA00358 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Timothy Lee Clark ETAL
Private
Nearby Dams
Clements Lake Dam
Colquitt, GA
Low Hazard 10 ftTerry Clark Lake Dam #2
Colquitt, GA
Low Hazard 22 ftHall Lake Dam
Colquitt, GA
Low Hazard 10 ftLower Smith Lake Dam
Colquitt, GA
Low Hazard 18 ftDemott Lake Dam South
Colquitt, GA
Low Hazard 11 ftFriedlander Lake Dam
Colquitt, GA
Low Hazard 16 ftSmith Lake Dam
Colquitt, GA
Low Hazard 14 ftDemott Lake Dam
Colquitt, GA
Low Hazard 17 ftFrequently Asked Questions
What is the hazard classification of Clark Lake Dam?
Clark Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Clark Lake Dam?
Clark Lake Dam is owned by Timothy Lee Clark ETAL (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Clark Lake Dam?
Clark Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Clark Lake Dam?
Clark Lake Dam has a dam height of 13 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Clark Lake Dam last inspected?
Clark Lake Dam was last inspected on April 1, 2010. Inspection dates indicate when a formal review occurred, not the results of that inspection.