Chester Goodwin Dam
Key Takeaway
Chester Goodwin Dam is classified as low hazard in Oklahoma. It was completed in 1999 and is 27 years old. Its primary use is fish and wildlife pond.
Physical Details
| Dam Height | 30 ft (taller than 54.9% in OK) |
| Dam Length | 2 ft |
| Dam Type | Earth |
| Max Storage | 100 acre-ft |
| Normal Storage | 70 acre-ft |
| Drainage Area | 0 sq mi |
| Max Discharge | 66 cfs |
| Year Completed | 1999 (27 years old) |
| NID ID | OK30114 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
CHESTER GOODWIN & PATRICIA PICKLE
Private
Nearby Dams
Frequently Asked Questions
What is the hazard classification of Chester Goodwin Dam?
Chester Goodwin Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Chester Goodwin Dam?
Chester Goodwin Dam is owned by CHESTER GOODWIN & PATRICIA PICKLE (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Chester Goodwin Dam built?
Chester Goodwin Dam was completed in 1999, making it 27 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Chester Goodwin Dam?
Chester Goodwin Dam serves the following purposes: Fish And Wildlife Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Chester Goodwin Dam?
Chester Goodwin Dam has a dam height of 30 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Chester Goodwin Dam last inspected?
Chester Goodwin Dam was last inspected on January 19, 2010. Inspection dates indicate when a formal review occurred, not the results of that inspection.