Canyon Lakes Project Dam No 3
Key Takeaway
Canyon Lakes Project Dam No 3 is classified as significant hazard in Texas. It was completed in 1976 and is 50 years old. Its primary use is recreation. Significant hazard means failure could cause economic or environmental damage. Learn more.
Physical Details
| Dam Height | 9 ft (taller than 2.7% in TX) |
| Dam Length | 330 ft |
| Dam Type | Other |
| Max Storage | 73 acre-ft |
| Normal Storage | 73 acre-ft |
| Surface Area | 13 acres |
| Drainage Area | 214 sq mi |
| Max Discharge | 7,196 cfs |
| Year Completed | 1976 (50 years old) |
| NID ID | TX04786 |
Safety Information
No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
CITY OF LUBBOCK
Local Government
Nearby Dams
Canyon Lakes Project Dam No 2
Lubbock, TX
Significant Hazard 12 ftCanyon Lakes Project Dam No 6
Lubbock, TX
Low Hazard 18 ftLubbock Terminal Reservoir Levee
Lubbock, TX
High Hazard 15 ftClear Water Lake Dam
Lubbock, TX
Low Hazard 17 ftMcmillan Dam
Lubbock, TX
High Hazard 76 ftLake Ransom Canyon Dam
Lubbock, TX
Significant Hazard 26 ftFrequently Asked Questions
What is the hazard classification of Canyon Lakes Project Dam No 3?
Canyon Lakes Project Dam No 3 is classified as Significant Hazard. No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Canyon Lakes Project Dam No 3?
Canyon Lakes Project Dam No 3 is owned by CITY OF LUBBOCK (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Canyon Lakes Project Dam No 3 built?
Canyon Lakes Project Dam No 3 was completed in 1976, making it 50 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Canyon Lakes Project Dam No 3?
Canyon Lakes Project Dam No 3 serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Canyon Lakes Project Dam No 3?
Canyon Lakes Project Dam No 3 has a dam height of 9 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Canyon Lakes Project Dam No 3 last inspected?
Canyon Lakes Project Dam No 3 was last inspected on October 11, 2016. Inspection dates indicate when a formal review occurred, not the results of that inspection.