Campbell Dam 480
Key Takeaway
Campbell Dam 480 is classified as low hazard in Nebraska. It was completed in 1942 and is 84 years old. Its primary use is irrigation.
Physical Details
| Dam Height | 27 ft (taller than 55% in NE) |
| Dam Length | 445 ft |
| Dam Type | Earth |
| Max Storage | 265 acre-ft |
| Normal Storage | 80 acre-ft |
| Surface Area | 14 acres |
| Drainage Area | 2 sq mi |
| Max Discharge | 812 cfs |
| Year Completed | 1942 (84 years old) |
| NID ID | NE00480 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Paul W Smith
Private
Nearby Dams
Shafer Dam
Furnas, NE
Low Hazard 15 ftBrown Grain & Livestock Dam
Furnas, NE
Low Hazard 17 ftTheobald Dam
Furnas, NE
Low Hazard 11 ftVan Cleave Dam
Furnas, NE
Low Hazard 21 ftHunt Dam
Furnas, NE
Low Hazard 14 ftHardenbrook Dam
Furnas, NE
Low Hazard 19 ftGarey Dam
Furnas, NE
Low Hazard 19 ftSturtevant Dam
Furnas, NE
Low Hazard 13 ftFrequently Asked Questions
What is the hazard classification of Campbell Dam 480?
Campbell Dam 480 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Campbell Dam 480?
Campbell Dam 480 is owned by Paul W Smith (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Campbell Dam 480 built?
Campbell Dam 480 was completed in 1942, making it 84 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Campbell Dam 480?
Campbell Dam 480 serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Campbell Dam 480?
Campbell Dam 480 has a dam height of 27 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Campbell Dam 480 last inspected?
Campbell Dam 480 was last inspected on September 18, 2023. Inspection dates indicate when a formal review occurred, not the results of that inspection.