Callaway Lake Dam
Key Takeaway
Callaway Lake Dam is classified as low hazard in Georgia. Its primary use is recreation.
Physical Details
| Dam Height | 34 ft (taller than 85% in GA) |
| Dam Length | 640 ft |
| Dam Type | Earth |
| Max Storage | 1.1K acre-ft |
| Normal Storage | 660 acre-ft |
| Surface Area | 55 acres |
| Drainage Area | 1,350 sq mi |
| NID ID | GA01660 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Soma Farms LLLP
Private
Nearby Dams
Lake Margie Dam
Harris, GA
Low Hazard 34 ftGerman Mountain Lake Dam
Harris, GA
Low Hazard 34 ftCopeland Dam
Harris, GA
Low Hazard 25 ftProposed Callaway Dam
Harris, GA
Low Hazard 54 ftRiley Lake Dam
Harris, GA
Low Hazard 26 ftLewis Lake Dam
Harris, GA
Low Hazard 40 ftPiedmont Lake Dam
Harris, GA
High Hazard 60 ftProposed Callaway Farms Lake Dam
Harris, GA
Low Hazard 38 ftFrequently Asked Questions
What is the hazard classification of Callaway Lake Dam?
Callaway Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Callaway Lake Dam?
Callaway Lake Dam is owned by Soma Farms LLLP (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Callaway Lake Dam?
Callaway Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Callaway Lake Dam?
Callaway Lake Dam has a dam height of 34 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Callaway Lake Dam last inspected?
Callaway Lake Dam was last inspected on January 21, 2020. Inspection dates indicate when a formal review occurred, not the results of that inspection.