Brave Warrior Dam
Key Takeaway
Brave Warrior Dam is classified as low hazard in Montana. Its primary use is flood risk reduction.
Physical Details
| Dam Length | 445 ft |
| Dam Type | Gravity |
| Max Storage | 61 acre-ft |
| Normal Storage | 0 acre-ft |
| Surface Area | 22 acres |
| Drainage Area | 1 sq mi |
| NID ID | MT03413 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
DOI BLM
Federal Government
Nearby Dams
Thretening Times
Blaine, MT
Low Hazard 20 ftGolden Gate Dam
Blaine, MT
Low HazardAnita Dam
Blaine, MT
High HazardBr-22 Retention Dam
Blaine, MT
Low HazardBr-45 Retention Dam
Blaine, MT
Low HazardBr-55 Retention Dam
Blaine, MT
Low HazardRoyal Champion
Blaine, MT
Low Hazard 15 ftMcLaren Dam
Blaine, MT
Low Hazard 24 ftFrequently Asked Questions
What is the hazard classification of Brave Warrior Dam?
Brave Warrior Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Brave Warrior Dam?
Brave Warrior Dam is owned by DOI BLM (Federal Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Brave Warrior Dam?
Brave Warrior Dam serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
When was Brave Warrior Dam last inspected?
Brave Warrior Dam was last inspected on September 5, 2018. Inspection dates indicate when a formal review occurred, not the results of that inspection.