Branson Lake Dam
Key Takeaway
Branson Lake Dam is classified as low hazard in Texas. It was completed in 1963 and is 63 years old. Its primary use is irrigation.
Physical Details
| Dam Height | 19 ft (taller than 30.6% in TX) |
| Dam Length | 645 ft |
| Dam Type | Earth |
| Max Storage | 266 acre-ft |
| Normal Storage | 162 acre-ft |
| Surface Area | 0 acres |
| Drainage Area | 0 sq mi |
| Year Completed | 1963 (63 years old) |
| NID ID | TX01181 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
H BRANSON
Private
Nearby Dams
Le Wallen Lake No 2 Dam
Palo Pinto, TX
Low Hazard 12 ftBaileys Lake Dam
Erath, TX
Low Hazard 23 ftLe Wallen Lake No 1 Dam
Palo Pinto, TX
Low Hazard 31 ftEngler Lake Dam
Hood, TX
High Hazard 20 ftBlackmon Stock Tank Dam
Palo Pinto, TX
Significant Hazard 16 ftHilltop Presedimentation Reservoir Dam
Palo Pinto, TX
High Hazard 32 ftPrice Lake Dam
Parker, TX
Low Hazard 27 ftTaylors Big Lake Dam
Parker, TX
Low Hazard 19 ftFrequently Asked Questions
What is the hazard classification of Branson Lake Dam?
Branson Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Branson Lake Dam?
Branson Lake Dam is owned by H BRANSON (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Branson Lake Dam built?
Branson Lake Dam was completed in 1963, making it 63 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Branson Lake Dam?
Branson Lake Dam serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Branson Lake Dam?
Branson Lake Dam has a dam height of 19 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Branson Lake Dam last inspected?
Branson Lake Dam was last inspected on November 29, 1977. Inspection dates indicate when a formal review occurred, not the results of that inspection.