Br-8 Retention Dam
Key Takeaway
Br-8 Retention Dam is classified as low hazard in Montana. It was completed in 1936 and is 90 years old. Its primary use is flood risk reduction.
Physical Details
| Dam Length | 417 ft |
| Dam Type | Gravity |
| Max Storage | 54 acre-ft |
| Normal Storage | 54 acre-ft |
| Surface Area | 27 acres |
| Year Completed | 1936 (90 years old) |
| Year Modified | 1936 |
| NID ID | MT00777 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
DOI BLM
Federal Government
Nearby Dams
Reser Dam
Blaine, MT
Low HazardMiss Doll Dial Dam
Blaine, MT
Low HazardKrott, L.
Blaine, MT
Low Hazard 8 ftBest Rocky Twist
Blaine, MT
Low Hazard 20 ftElias #1
Blaine, MT
Low Hazard 15 ftSkoyen
Blaine, MT
Low Hazard 20 ftMistress Leader
Hill, MT
Low Hazard 25 ftMcLaren Dam
Blaine, MT
Low Hazard 24 ftFrequently Asked Questions
What is the hazard classification of Br-8 Retention Dam?
Br-8 Retention Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Br-8 Retention Dam?
Br-8 Retention Dam is owned by DOI BLM (Federal Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Br-8 Retention Dam built?
Br-8 Retention Dam was completed in 1936, making it 90 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Br-8 Retention Dam?
Br-8 Retention Dam serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
When was Br-8 Retention Dam last inspected?
Br-8 Retention Dam was last inspected on October 24, 2017. Inspection dates indicate when a formal review occurred, not the results of that inspection.