Blake Dam
Key Takeaway
Blake Dam is classified as low hazard in Nebraska. It was completed in 1960 and is 66 years old. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 15 ft (taller than 10.3% in NE) |
| Dam Length | 300 ft |
| Dam Type | Earth |
| Max Storage | 76 acre-ft |
| Normal Storage | 32 acre-ft |
| Surface Area | 9 acres |
| Drainage Area | 2 sq mi |
| Year Completed | 1960 (66 years old) |
| NID ID | NE03646 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Barbara A Tines
Private
Nearby Dams
Teter Dam
Red Willow, NE
Low Hazard 21 ftDry Creek 5-A
Red Willow, NE
Low Hazard 25 ftDry Creek 3-A
Red Willow, NE
Low Hazard 29 ftDry Creek 8-C
Red Willow, NE
Significant Hazard 27 ftDry Creek 8-B
Red Willow, NE
Low Hazard 29 ftDry Creek 3-B
Frontier, NE
Low Hazard 37 ftDry Creek 8-A
Red Willow, NE
Low Hazard 31 ftMason Nelms Dam
Red Willow, NE
Low Hazard 19 ftFrequently Asked Questions
What is the hazard classification of Blake Dam?
Blake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Blake Dam?
Blake Dam is owned by Barbara A Tines (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Blake Dam built?
Blake Dam was completed in 1960, making it 66 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Blake Dam?
Blake Dam serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Blake Dam?
Blake Dam has a dam height of 15 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Blake Dam last inspected?
Blake Dam was last inspected on April 27, 2020. Inspection dates indicate when a formal review occurred, not the results of that inspection.