Big Timber #29
Key Takeaway
Big Timber #29 is classified as low hazard in Montana. It was completed in 1940 and is 86 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 16 ft (taller than 31.7% in MT) |
| Dam Length | 275 ft |
| Dam Type | Earth |
| Max Storage | 66 acre-ft |
| Normal Storage | 28 acre-ft |
| Year Completed | 1940 (86 years old) |
| NID ID | MT01954 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
BIG TIMBER LIVESTOCK CO
Private
Nearby Dams
Quell #1
Rosebud, MT
Low Hazard 12 ftBig Timber Livestock #1
Treasure, MT
Low Hazard 17 ftBig Timber #27
Rosebud, MT
Low Hazard 16 ftBig Timber #4
Rosebud, MT
Low Hazard 18 ftBig Timber #24
Rosebud, MT
Low Hazard 25 ftA S Welch #1
Rosebud, MT
Low Hazard 12 ftDowns #1
Rosebud, MT
Low Hazard 14 ftLambing Shed
Rosebud, MT
Low Hazard 26 ftFrequently Asked Questions
What is the hazard classification of Big Timber #29?
Big Timber #29 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Big Timber #29?
Big Timber #29 is owned by BIG TIMBER LIVESTOCK CO (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Big Timber #29 built?
Big Timber #29 was completed in 1940, making it 86 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Big Timber #29?
Big Timber #29 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Big Timber #29?
Big Timber #29 has a dam height of 16 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.