Bellwood 6-F
Key Takeaway
Bellwood 6-F is classified as low hazard in Nebraska. It was completed in 1970 and is 56 years old. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 33 ft (taller than 76.9% in NE) |
| Dam Length | 437 ft |
| Dam Type | Earth |
| Max Storage | 376 acre-ft |
| Normal Storage | 35 acre-ft |
| Surface Area | 9 acres |
| Drainage Area | 1 sq mi |
| Max Discharge | 1,332 cfs |
| Year Completed | 1970 (56 years old) |
| NID ID | NE00025 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Lower Platte North Natural Resources District
Local Government
Nearby Dams
Bellwood 6-E
Butler, NE
Significant Hazard 27 ftSchmit Dam
Butler, NE
Low Hazard 25 ftBellwood 5-G
Butler, NE
Low Hazard 31 ftBellwood 6-G
Butler, NE
Low Hazard 28 ftBellwood 5-J
Butler, NE
Low Hazard 29 ftBellwood 5-K
Butler, NE
Low Hazard 29 ftBellwood 2-C
Butler, NE
Significant Hazard 50 ftBellwood 5-H
Butler, NE
Low Hazard 31 ftFrequently Asked Questions
What is the hazard classification of Bellwood 6-F?
Bellwood 6-F is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Bellwood 6-F?
Bellwood 6-F is owned by Lower Platte North Natural Resources District (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Bellwood 6-F built?
Bellwood 6-F was completed in 1970, making it 56 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Bellwood 6-F?
Bellwood 6-F serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Bellwood 6-F?
Bellwood 6-F has a dam height of 33 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Bellwood 6-F last inspected?
Bellwood 6-F was last inspected on April 18, 2019. Inspection dates indicate when a formal review occurred, not the results of that inspection.