Bellwood 3-A
Key Takeaway
Bellwood 3-A is classified as low hazard in Nebraska. It was completed in 1965 and is 61 years old. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 34 ft (taller than 79.7% in NE) |
| Dam Length | 462 ft |
| Dam Type | Earth |
| Max Storage | 183 acre-ft |
| Normal Storage | 56 acre-ft |
| Surface Area | 9 acres |
| Drainage Area | 1 sq mi |
| Max Discharge | 619 cfs |
| Year Completed | 1965 (61 years old) |
| NID ID | NE00016 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Lower Platte North Natural Resources District
Local Government
Nearby Dams
Gruenewald Dam
Butler, NE
Low Hazard 19 ftBellwood 3-C
Butler, NE
Low Hazard 22 ftSpatz Dam
Butler, NE
Low Hazard 15 ftWitt Feedyard Lagoon Dam
Polk, NE
Low Hazard 17 ftBellwood 3-B
Butler, NE
Low Hazard 39 ftBellwood 2-C
Butler, NE
Significant Hazard 50 ftBellwood 6-G
Butler, NE
Low Hazard 28 ftClear Creek 6
Polk, NE
Significant Hazard 30 ftFrequently Asked Questions
What is the hazard classification of Bellwood 3-A?
Bellwood 3-A is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Bellwood 3-A?
Bellwood 3-A is owned by Lower Platte North Natural Resources District (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Bellwood 3-A built?
Bellwood 3-A was completed in 1965, making it 61 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Bellwood 3-A?
Bellwood 3-A serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Bellwood 3-A?
Bellwood 3-A has a dam height of 34 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Bellwood 3-A last inspected?
Bellwood 3-A was last inspected on June 15, 2021. Inspection dates indicate when a formal review occurred, not the results of that inspection.