Bell Lake Dam
Key Takeaway
Bell Lake Dam is classified as low hazard in Georgia. Its primary use is recreation.
Physical Details
| Dam Height | 16 ft (taller than 24.2% in GA) |
| Dam Length | 600 ft |
| Dam Type | Earth |
| Max Storage | 120 acre-ft |
| Normal Storage | 91 acre-ft |
| Surface Area | 14 acres |
| Drainage Area | 86 sq mi |
| NID ID | GA03143 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Cynthia Ann Bell Smith
Private
Nearby Dams
Dean Scarborough
Dodge, GA
Low Hazard 13 ftJamieson Pond #3 (Rhine) Dam
Dodge, GA
Low Hazard 21 ftWatkins Lake Dam
Dodge, GA
Low Hazard 18 ftPeterson Irrigation Pond Dam South
Dodge, GA
Low Hazard 11 ftWatkins Irrig. Pond North Dam
Dodge, GA
Low Hazard 15 ftMccranie Lake Dam
Dodge, GA
Low Hazard 19 ftLake Seaborn Dam
Dodge, GA
Low Hazard 18 ftCadwell Irrigation Pond Dam #3
Dodge, GA
Low Hazard 16 ftFrequently Asked Questions
What is the hazard classification of Bell Lake Dam?
Bell Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Bell Lake Dam?
Bell Lake Dam is owned by Cynthia Ann Bell Smith (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Bell Lake Dam?
Bell Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Bell Lake Dam?
Bell Lake Dam has a dam height of 16 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Bell Lake Dam last inspected?
Bell Lake Dam was last inspected on October 1, 2017. Inspection dates indicate when a formal review occurred, not the results of that inspection.