Beaman Dam
Key Takeaway
Beaman Dam is classified as low hazard in Texas. It was completed in 1980 and is 46 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 27 ft (taller than 58.3% in TX) |
| Dam Length | 614 ft |
| Dam Type | Earth |
| Max Storage | 97 acre-ft |
| Normal Storage | 79 acre-ft |
| Surface Area | 0 acres |
| Drainage Area | 0 sq mi |
| Year Completed | 1980 (46 years old) |
| NID ID | TX06225 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
ROBERT BEAMAN
Private
Nearby Dams
Mikeska Gss
Austin, TX
Low Hazard 30 ftTravis Road Dam
Austin, TX
Low Hazard 37 ftGeorge Alexander Dam
Austin, TX
Low Hazard 26 ftMawis Lake Dam
Austin, TX
Low Hazard 11 ftTraylor Gss
Austin, TX
Low Hazard 26 ftMewis Lake Dam
Austin, TX
Low Hazard 14 ftCook Lake Dam
Austin, TX
Low Hazard 18 ftFenner and Taylor Pond Dam
Austin, TX
Low Hazard 28 ftFrequently Asked Questions
What is the hazard classification of Beaman Dam?
Beaman Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Beaman Dam?
Beaman Dam is owned by ROBERT BEAMAN (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Beaman Dam built?
Beaman Dam was completed in 1980, making it 46 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Beaman Dam?
Beaman Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Beaman Dam?
Beaman Dam has a dam height of 27 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.