Bailey Mine Area No. 3 Slurry

TR ENLOW FORK· Greene, Pennsylvania· Built 2014· Earth· 337 ft tall
High Hazard Other Private

Key Takeaway

Bailey Mine Area No. 3 Slurry is classified as high hazard in Pennsylvania. It was completed in 2014 and is 12 years old. Its primary use is other. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.

Physical Details

Dam Height 337 ft (taller than 99.7% in PA)
Dam Length2,800 ft
Dam TypeEarth
Max Storage24.1K acre-ft
Normal Storage21.0K acre-ft
Surface Area181 acres
Drainage Area0 sq mi
Year Completed2014 (12 years old)
NID IDPA01824

Safety Information

High Hazard

Loss of human life is likely if the dam fails.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: Yes
Last Inspection: August 3, 2020
State Regulated: Yes
Regulatory Agency: Pennsylvania Department of Environmental Protection

Ownership

CONSOL PA COAL CO LLC

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Bailey Mine Area No. 3 Slurry?

Bailey Mine Area No. 3 Slurry is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Bailey Mine Area No. 3 Slurry?

Bailey Mine Area No. 3 Slurry is owned by CONSOL PA COAL CO LLC (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Bailey Mine Area No. 3 Slurry built?

Bailey Mine Area No. 3 Slurry was completed in 2014, making it 12 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Bailey Mine Area No. 3 Slurry?

Bailey Mine Area No. 3 Slurry serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Bailey Mine Area No. 3 Slurry?

Bailey Mine Area No. 3 Slurry has a dam height of 337 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Bailey Mine Area No. 3 Slurry last inspected?

Bailey Mine Area No. 3 Slurry was last inspected on August 3, 2020. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.