B - 2 Pond Dam
Key Takeaway
B - 2 Pond Dam is classified as low hazard in Virginia. Its primary use is other.
Physical Details
| Dam Height | 15 ft (taller than 11.8% in VA) |
| Dam Length | 4,460 ft |
| Dam Type | Earth |
| Max Storage | 1.7K acre-ft |
| Normal Storage | 650 acre-ft |
| Surface Area | 52 acres |
| Drainage Area | 1 sq mi |
| NID ID | VA093012 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
International Paper - Franklin Mill
Private
Nearby Dams
Asb Pond Dam
Isle of Wight, VA
High Hazard 17 ftB - 1 Pond Dam
Isle of Wight, VA
Low Hazard 13 ftRay Development Dam
Franklin City, VA
Unknown 18 ftC - Pond Dam
Suffolk, VA
High Hazard 52 ftD - Pond Dam
Suffolk, VA
Unknown 23 ftAlemar Dam
Isle of Wight, VA
Unknown 17 ftCypress Cove Dam
Southampton, VA
Unknown 9 ftCamp Dam
Southampton, VA
Unknown 13 ftFrequently Asked Questions
What is the hazard classification of B - 2 Pond Dam?
B - 2 Pond Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates B - 2 Pond Dam?
B - 2 Pond Dam is owned by International Paper - Franklin Mill (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of B - 2 Pond Dam?
B - 2 Pond Dam serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is B - 2 Pond Dam?
B - 2 Pond Dam has a dam height of 15 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was B - 2 Pond Dam last inspected?
B - 2 Pond Dam was last inspected on January 25, 2023. Inspection dates indicate when a formal review occurred, not the results of that inspection.