Aytolloha #1
Key Takeaway
Aytolloha #1 is classified as low hazard in Montana. It was completed in 1957 and is 69 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 30 ft (taller than 82.7% in MT) |
| Dam Length | 150 ft |
| Dam Type | Earth |
| Max Storage | 145 acre-ft |
| Normal Storage | 94 acre-ft |
| Year Completed | 1957 (69 years old) |
| NID ID | MT03239 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
ANDRESEN FARMS INC
Private
Nearby Dams
L Sayer-Magdalena
Roosevelt, MT
Low Hazard 22 ftAnderson Reservoir #1 (Roosevelt)
Roosevelt, MT
Low Hazard 20 ftBaracker
Roosevelt, MT
Low Hazard 30 ftStructure No 149
Roosevelt, MT
Low Hazard 15 ftNickwall
McCone, MT
Low Hazard 12 ftWilma
Roosevelt, MT
Low Hazard 15 ftBarney Rubbel
Roosevelt, MT
Low Hazard 15 ftCrandall Reservoir
Roosevelt, MT
Low Hazard 20 ftFrequently Asked Questions
What is the hazard classification of Aytolloha #1?
Aytolloha #1 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Aytolloha #1?
Aytolloha #1 is owned by ANDRESEN FARMS INC (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Aytolloha #1 built?
Aytolloha #1 was completed in 1957, making it 69 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Aytolloha #1?
Aytolloha #1 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Aytolloha #1?
Aytolloha #1 has a dam height of 30 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.