Zuber Hollow Reservoir
Key Takeaway
Zuber Hollow Reservoir is classified as low hazard in New Mexico. It was completed in 1928 and is 98 years old. Its primary use is irrigation.
Physical Details
| Dam Height | 20 ft (taller than 17.2% in NM) |
| Dam Length | 900 ft |
| Dam Type | Earth |
| Max Storage | 225 acre-ft |
| Normal Storage | 60 acre-ft |
| Surface Area | 11 acres |
| Year Completed | 1928 (98 years old) |
| Year Modified | 1996 |
| NID ID | NM00247 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
GRASSIE, JAMES
Private
Nearby Dams
Frequently Asked Questions
What is the hazard classification of Zuber Hollow Reservoir?
Zuber Hollow Reservoir is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Zuber Hollow Reservoir?
Zuber Hollow Reservoir is owned by GRASSIE, JAMES (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Zuber Hollow Reservoir built?
Zuber Hollow Reservoir was completed in 1928, making it 98 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Zuber Hollow Reservoir?
Zuber Hollow Reservoir serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Zuber Hollow Reservoir?
Zuber Hollow Reservoir has a dam height of 20 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Zuber Hollow Reservoir last inspected?
Zuber Hollow Reservoir was last inspected on April 1, 2015. Inspection dates indicate when a formal review occurred, not the results of that inspection.