Wilson Dam
Key Takeaway
Wilson Dam is classified as low hazard in Missouri. It was completed in 1997 and is 29 years old. Its primary use is grade stabilization.
Physical Details
| Dam Height | 27 ft (taller than 49% in MO) |
| Dam Length | 353 ft |
| Dam Type | Earth |
| Max Storage | 20 acre-ft |
| Normal Storage | 12 acre-ft |
| Surface Area | 10 acres |
| Drainage Area | 240 sq mi |
| Max Discharge | 38 cfs |
| Year Completed | 1997 (29 years old) |
| NID ID | MO50706 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
DANNY WILSON
Private
Nearby Dams
Tim Redding Dam
Clark, MO
Low Hazard 25 ftSeyb Lake Dam
Clark, MO
Low Hazard 25 ftBrotherton Lake Dam
Clark, MO
Low Hazard 25 ftBear Creek Watershed Dam Lts- 62
Clark, MO
Low Hazard 25 ftSeyb Dam
Clark, MO
Low Hazard 34 ftGumieny Lake Dam
Clark, MO
Low Hazard 36 ftSelway Dam
Clark, MO
Low Hazard 26 ftPhillips Dam
Clark, MO
Low Hazard 32 ftFrequently Asked Questions
What is the hazard classification of Wilson Dam?
Wilson Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Wilson Dam?
Wilson Dam is owned by DANNY WILSON (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Wilson Dam built?
Wilson Dam was completed in 1997, making it 29 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Wilson Dam?
Wilson Dam serves the following purposes: Grade Stabilization. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Wilson Dam?
Wilson Dam has a dam height of 27 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.