Williams Lake Dam
Key Takeaway
Williams Lake Dam is classified as low hazard in North Carolina. It was completed in 1954 and is 72 years old. Its primary use is recreation.
Physical Details
| Dam Length | 1,200 ft |
| Dam Type | Earth |
| Max Storage | 144 acre-ft |
| Normal Storage | 120 acre-ft |
| Surface Area | 16 acres |
| Max Discharge | 66 cfs |
| Year Completed | 1954 (72 years old) |
| NID ID | NC01197 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
James Chatellier
Private
Nearby Dams
Olde Farm Lake Dam
Harnett, NC
High HazardCarolina Lakes Dam #2
Harnett, NC
High HazardCarolina Lakes Dam #1
Harnett, NC
High HazardLake Carolina Dam
Harnett, NC
High HazardBuffalo Lake Dam
Harnett, NC
High HazardSilver Lake Dam
Harnett, NC
High HazardCrystal Lake Dam
Harnett, NC
High HazardOverhills No. 1
Harnett, NC
Low Hazard 16 ftFrequently Asked Questions
What is the hazard classification of Williams Lake Dam?
Williams Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Williams Lake Dam?
Williams Lake Dam is owned by James Chatellier (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Williams Lake Dam built?
Williams Lake Dam was completed in 1954, making it 72 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Williams Lake Dam?
Williams Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
When was Williams Lake Dam last inspected?
Williams Lake Dam was last inspected on October 25, 2012. Inspection dates indicate when a formal review occurred, not the results of that inspection.