Watson Dam
Key Takeaway
Watson Dam is classified as low hazard in Missouri. It was completed in 2003 and is 23 years old. Its primary use is grade stabilization.
Physical Details
| Dam Height | 29 ft (taller than 59.6% in MO) |
| Dam Length | 503 ft |
| Dam Type | Earth |
| Max Storage | 36 acre-ft |
| Normal Storage | 32 acre-ft |
| Surface Area | 12 acres |
| Drainage Area | 230 sq mi |
| Max Discharge | 1 cfs |
| Year Completed | 2003 (23 years old) |
| NID ID | MO51173 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
RANDY WATSON
Private
Nearby Dams
Rick Mcvicker Dam
Macon, MO
Low Hazard 27 ftMcvicker Lake Dam
Macon, MO
Low Hazard 25 ftBlomberg Farm Dam
Macon, MO
High Hazard 43 ftLoveland Dam
Macon, MO
Low Hazard 33 ftWest Dam
Macon, MO
Low Hazard 25 ftLarson Lake Dam
Macon, MO
Low Hazard 30 ftJwest Dam
Macon, MO
Low Hazard 27 ftCentral Coal&Coke Corp Lake Dam
Macon, MO
Low Hazard 15 ftFrequently Asked Questions
What is the hazard classification of Watson Dam?
Watson Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Watson Dam?
Watson Dam is owned by RANDY WATSON (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Watson Dam built?
Watson Dam was completed in 2003, making it 23 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Watson Dam?
Watson Dam serves the following purposes: Grade Stabilization. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Watson Dam?
Watson Dam has a dam height of 29 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Watson Dam last inspected?
Watson Dam was last inspected on September 30, 2003. Inspection dates indicate when a formal review occurred, not the results of that inspection.