Vanatta Dam
Key Takeaway
Vanatta Dam is classified as low hazard in Iowa. It was completed in 2003 and is 23 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 38 ft (taller than 80.1% in IA) |
| Dam Length | 145 ft |
| Dam Type | Earth |
| Max Storage | 60 acre-ft |
| Normal Storage | 41 acre-ft |
| Surface Area | 3 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 2003 (23 years old) |
| NID ID | IA03660 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Wayne Vanatta
Private
Nearby Dams
Shirley Dam
Fremont, IA
Low Hazard 27 ftKopecky Dam
Fremont, IA
Low Hazard 31 ftStoner Dam
Fremont, IA
Low Hazard 40 ftDraper Dam
Fremont, IA
Low Hazard 46 ftLewis Dam
Fremont, IA
Low Hazard 27 ftTaylor Dam
Fremont, IA
Low Hazard 37 ftCheney Dam
Fremont, IA
Low Hazard 36 ftGrundle Dam
Fremont, IA
Low Hazard 38 ftFrequently Asked Questions
What is the hazard classification of Vanatta Dam?
Vanatta Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Vanatta Dam?
Vanatta Dam is owned by Wayne Vanatta (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Vanatta Dam built?
Vanatta Dam was completed in 2003, making it 23 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Vanatta Dam?
Vanatta Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Vanatta Dam?
Vanatta Dam has a dam height of 38 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.