Thomas Dam
Key Takeaway
Thomas Dam is classified as low hazard in Missouri. It was completed in 2006 and is 20 years old. Its primary use is grade stabilization.
Physical Details
| Dam Height | 27 ft (taller than 49% in MO) |
| Dam Length | 250 ft |
| Dam Type | Earth |
| Max Storage | 31 acre-ft |
| Normal Storage | 23 acre-ft |
| Surface Area | 4 acres |
| Drainage Area | 80 sq mi |
| Max Discharge | 2 cfs |
| Year Completed | 2006 (20 years old) |
| NID ID | MO51410 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
DOUG THOMAS
Private
Nearby Dams
Timber Ridge LLC
Monroe, MO
Low Hazard 26 ftQualles Lake Dam
Monroe, MO
Low Hazard 39 ftVandewert Dam
Monroe, MO
Low Hazard 28 ftJohnson Lake Dam
Randolph, MO
Low Hazard 25 ftMallory Lake Dam
Randolph, MO
Low Hazard 20 ftBrown Lake Dam
Monroe, MO
Low Hazard 25 ftWest Town Lake Dam
Monroe, MO
Low Hazard 24 ftMccowan Dam
Monroe, MO
High Hazard 25 ftFrequently Asked Questions
What is the hazard classification of Thomas Dam?
Thomas Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Thomas Dam?
Thomas Dam is owned by DOUG THOMAS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Thomas Dam built?
Thomas Dam was completed in 2006, making it 20 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Thomas Dam?
Thomas Dam serves the following purposes: Grade Stabilization. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Thomas Dam?
Thomas Dam has a dam height of 27 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Thomas Dam last inspected?
Thomas Dam was last inspected on September 29, 2006. Inspection dates indicate when a formal review occurred, not the results of that inspection.