Taylor Dam
Key Takeaway
Taylor Dam is classified as low hazard in Iowa. It was completed in 1996 and is 30 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 28 ft (taller than 36.9% in IA) |
| Dam Length | 280 ft |
| Dam Type | Earth |
| Max Storage | 33 acre-ft |
| Normal Storage | 13 acre-ft |
| Surface Area | 2 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1996 (30 years old) |
| NID ID | IA03183 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Dave Taylor
Private
Nearby Dams
Hynick Dam 2
Mahaska, IA
Low Hazard 28 ftVeldhuizen Dam
Mahaska, IA
Low Hazard 29 ftEdel Dam
Mahaska, IA
Low Hazard 22 ftFox Run Development - Upper Dam
Mahaska, IA
Low Hazard 25 ftFox Run Development - Lower Dam
Mahaska, IA
Significant Hazard 15 ftHugen Dam
Mahaska, IA
Low Hazard 22 ftVan Donselar Dam
Mahaska, IA
Low Hazard 30 ftBaker Dam
Mahaska, IA
Low Hazard 25 ftFrequently Asked Questions
What is the hazard classification of Taylor Dam?
Taylor Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Taylor Dam?
Taylor Dam is owned by Dave Taylor (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Taylor Dam built?
Taylor Dam was completed in 1996, making it 30 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Taylor Dam?
Taylor Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Taylor Dam?
Taylor Dam has a dam height of 28 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.