Stills Dam
Key Takeaway
Stills Dam is classified as low hazard in Iowa. It was completed in 1995 and is 31 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 24 ft (taller than 15.8% in IA) |
| Dam Length | 560 ft |
| Dam Type | Earth |
| Max Storage | 63 acre-ft |
| Normal Storage | 30 acre-ft |
| Surface Area | 5 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1995 (31 years old) |
| NID ID | IA02950 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Melvin Stills
Private
Nearby Dams
Voltmer Dam
Warren, IA
Low Hazard 31 ftClarke Co. Roadgrade Dam 8-73-25
Clarke, IA
Low Hazard 43 ftGreen Dam
Clarke, IA
Low Hazard 25 ftFelton Dam
Warren, IA
Low Hazard 22 ftGonseth Dam
Clarke, IA
Low Hazard 25 ftBeener Dam
Warren, IA
Low Hazard 30 ftLutz Dam
Clarke, IA
Low Hazard 26 ftWeiser Dam
Clarke, IA
Low Hazard 43 ftFrequently Asked Questions
What is the hazard classification of Stills Dam?
Stills Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Stills Dam?
Stills Dam is owned by Melvin Stills (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Stills Dam built?
Stills Dam was completed in 1995, making it 31 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Stills Dam?
Stills Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Stills Dam?
Stills Dam has a dam height of 24 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.