Spruce Run Flow Measuring Weir Dam
Key Takeaway
Spruce Run Flow Measuring Weir Dam is classified as low hazard in New Jersey. It was completed in 1960 and is 66 years old. Its primary use is other.
Physical Details
| Dam Height | 9 ft (taller than 12.9% in NJ) |
| Dam Length | 200 ft |
| Dam Type | Concrete |
| Max Storage | 102 acre-ft |
| Normal Storage | 52 acre-ft |
| Surface Area | 12 acres |
| Drainage Area | 41 sq mi |
| Max Discharge | 4,060 cfs |
| Year Completed | 1960 (66 years old) |
| NID ID | NJ01055 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
NJWSA
State Government
Nearby Dams
Clinton Mills Dike
Hunterdon, NJ
Significant Hazard 8 ftClinton Mills Dam
Hunterdon, NJ
Significant Hazard 14 ftSpruce Run Reservoir Dam
Hunterdon, NJ
High Hazard 93 ftNew Jersey No Name #31 Dam
Hunterdon, NJ
High Hazard 23 ftJutland Dam
Hunterdon, NJ
Significant Hazard 24 ftLake Solitude Dam
Hunterdon, NJ
High Hazard 42 ftNew Jersey No Name # 32 Dam
Hunterdon, NJ
Significant Hazard 40 ftRound Valley P&F Dike
Hunterdon, NJ
Low Hazard 68 ftFrequently Asked Questions
What is the hazard classification of Spruce Run Flow Measuring Weir Dam?
Spruce Run Flow Measuring Weir Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Spruce Run Flow Measuring Weir Dam?
Spruce Run Flow Measuring Weir Dam is owned by NJWSA (State Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Spruce Run Flow Measuring Weir Dam built?
Spruce Run Flow Measuring Weir Dam was completed in 1960, making it 66 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Spruce Run Flow Measuring Weir Dam?
Spruce Run Flow Measuring Weir Dam serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Spruce Run Flow Measuring Weir Dam?
Spruce Run Flow Measuring Weir Dam has a dam height of 9 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Spruce Run Flow Measuring Weir Dam last inspected?
Spruce Run Flow Measuring Weir Dam was last inspected on December 9, 2019. Inspection dates indicate when a formal review occurred, not the results of that inspection.