South Fork Blackwater River Dam E-26
Key Takeaway
South Fork Blackwater River Dam E-26 is classified as low hazard in Missouri. It was completed in 1965 and is 61 years old. Its primary use is grade stabilization.
Physical Details
| Dam Height | 22 ft (taller than 14.9% in MO) |
| Dam Length | 870 ft |
| Dam Type | Earth |
| Max Storage | 98 acre-ft |
| Normal Storage | 28 acre-ft |
| Surface Area | 1 acres |
| Drainage Area | 762 sq mi |
| Max Discharge | 200 cfs |
| Year Completed | 1965 (61 years old) |
| NID ID | MO50237 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
S.FK.BKWTR.R.WTSHD.SBDST
Local Government
Nearby Dams
South Fork Blackwater River Dam E- 25a
Johnson, MO
Low Hazard 28 ftHolden New City Reservoir
Johnson, MO
High Hazard 58 ftSouth Fork Blackwater River Dam E-24
Johnson, MO
Low Hazard 19 ftSouth Fork Blackwater River Dam A- 3
Johnson, MO
Low Hazard 25 ftKesterson Dam
Johnson, MO
High Hazard 25 ftEldridge Lake Dam
Johnson, MO
Low Hazard 25 ftMccannon Lake Dam
Johnson, MO
High Hazard 25 ftSouth Fork Blackwater River Dam E-29
Johnson, MO
Low Hazard 28 ftFrequently Asked Questions
What is the hazard classification of South Fork Blackwater River Dam E-26?
South Fork Blackwater River Dam E-26 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates South Fork Blackwater River Dam E-26?
South Fork Blackwater River Dam E-26 is owned by S.FK.BKWTR.R.WTSHD.SBDST (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was South Fork Blackwater River Dam E-26 built?
South Fork Blackwater River Dam E-26 was completed in 1965, making it 61 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of South Fork Blackwater River Dam E-26?
South Fork Blackwater River Dam E-26 serves the following purposes: Grade Stabilization. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is South Fork Blackwater River Dam E-26?
South Fork Blackwater River Dam E-26 has a dam height of 22 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.