Seley Dam
Key Takeaway
Seley Dam is classified as low hazard in Iowa. It was completed in 1990 and is 36 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 26 ft (taller than 24.7% in IA) |
| Dam Length | 460 ft |
| Dam Type | Earth |
| Max Storage | 52 acre-ft |
| Normal Storage | 19 acre-ft |
| Surface Area | 3 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1990 (36 years old) |
| NID ID | IA02632 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Twila R Seley
Private
Nearby Dams
Tapken Dam
Adair, IA
Low Hazard 28 ftClyde Frizell
Adair, IA
Low Hazard 26 ftBetty Beaman
Adair, IA
Low Hazard 32 ftOvermeyer Dam
Adair, IA
Low Hazard 30 ftThye Dam
Adair, IA
Low Hazard 43 ftStanzel Christian High School Dam
Adair, IA
Low Hazard 36 ftJim Walter Dam
Adair, IA
Low Hazard 26 ftSchildberg Dam
Adair, IA
Low Hazard 48 ftFrequently Asked Questions
What is the hazard classification of Seley Dam?
Seley Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Seley Dam?
Seley Dam is owned by Twila R Seley (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Seley Dam built?
Seley Dam was completed in 1990, making it 36 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Seley Dam?
Seley Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Seley Dam?
Seley Dam has a dam height of 26 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.