Rehse Dam
Key Takeaway
Rehse Dam is classified as low hazard in Iowa. It was completed in 1966 and is 60 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 27 ft (taller than 30.7% in IA) |
| Dam Length | 336 ft |
| Dam Type | Earth |
| Max Storage | 27 acre-ft |
| Normal Storage | 13 acre-ft |
| Surface Area | 2 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1966 (60 years old) |
| NID ID | IA00503 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Walter Rehse
Private
Nearby Dams
Wunschel Dam
Ida, IA
Low Hazard 38 ftMoorhead Pioneer Park Dam
Ida, IA
Low Hazard 36 ftGrell Pond Dam
Ida, IA
Significant Hazard 26 ftKnop Dam
Ida, IA
Low Hazard 34 ftVan Kekerix Dam
Ida, IA
Low Hazard 25 ftHoffman Dam
Ida, IA
Low Hazard 24 ftPerion Subwatershed Site Aa-300
Ida, IA
Low Hazard 29 ftWolterman Dam
Ida, IA
Low Hazard 28 ftFrequently Asked Questions
What is the hazard classification of Rehse Dam?
Rehse Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Rehse Dam?
Rehse Dam is owned by Walter Rehse (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Rehse Dam built?
Rehse Dam was completed in 1966, making it 60 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Rehse Dam?
Rehse Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Rehse Dam?
Rehse Dam has a dam height of 27 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Rehse Dam last inspected?
Rehse Dam was last inspected on February 9, 1968. Inspection dates indicate when a formal review occurred, not the results of that inspection.