Redman Flowage

UNNAMED DRAINAGE· Taylor, Wisconsin· Built 1965· Earth· 7 ft tall
Low Hazard Recreation State Government

Key Takeaway

Redman Flowage is classified as low hazard in Wisconsin. It was completed in 1965 and is 61 years old. Its primary use is recreation.

Physical Details

Dam Height 7 ft (taller than 1% in WI)
Dam Length1,000 ft
Dam TypeEarth
Max Storage125 acre-ft
Normal Storage65 acre-ft
Surface Area40 acres
Drainage Area1 sq mi
Max Discharge380 cfs
Year Completed1965 (61 years old)
NID IDWI01066

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: Yes
Last Inspection: June 24, 2013
State Regulated: Yes
Regulatory Agency: WIDNR

Ownership

Wisconsin Department of Natural Resources

State Government

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Redman Flowage?

Redman Flowage is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Redman Flowage?

Redman Flowage is owned by Wisconsin Department of Natural Resources (State Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Redman Flowage built?

Redman Flowage was completed in 1965, making it 61 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Redman Flowage?

Redman Flowage serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Redman Flowage?

Redman Flowage has a dam height of 7 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Redman Flowage last inspected?

Redman Flowage was last inspected on June 24, 2013. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.