Pender Dam
Key Takeaway
Pender Dam is classified as low hazard in Iowa. It was completed in 1964 and is 62 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 25 ft (taller than 19.3% in IA) |
| Dam Length | 460 ft |
| Dam Type | Earth |
| Max Storage | 33 acre-ft |
| Normal Storage | 33 acre-ft |
| Surface Area | 4 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1964 (62 years old) |
| NID ID | IA02891 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Ralph Pender
Private
Nearby Dams
Ayers Dam
Madison, IA
Low Hazard 37 ftBurhans Dam
Madison, IA
Low Hazard 34 ftWildwood Hill Dam
Madison, IA
Low Hazard 26 ftYoung Dam
Madison, IA
Low Hazard 35 ftSamuels Dam
Madison, IA
Low Hazard 58 ftJorgensen Dam
Madison, IA
Low Hazard 36 ftBishop/Barrows Dam
Madison, IA
Low Hazard 38 ftKnutsen Dam
Madison, IA
Low Hazard 29 ftFrequently Asked Questions
What is the hazard classification of Pender Dam?
Pender Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Pender Dam?
Pender Dam is owned by Ralph Pender (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Pender Dam built?
Pender Dam was completed in 1964, making it 62 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Pender Dam?
Pender Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Pender Dam?
Pender Dam has a dam height of 25 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.