Merillan Mills

HALLS CREEK· Jackson, Wisconsin· Built 1907· Gravity· 23 ft tall
Low Hazard Recreation Local Government

Key Takeaway

Merillan Mills is classified as low hazard in Wisconsin. It was completed in 1907 and is 119 years old. Its primary use is recreation.

Physical Details

Dam Height 23 ft (taller than 67% in WI)
Dam Length250 ft
Dam TypeGravity
Max Storage170 acre-ft
Normal Storage76 acre-ft
Surface Area16 acres
Drainage Area45 sq mi
Max Discharge2,750 cfs
Year Completed1907 (119 years old)
NID IDWI00045

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: July 25, 2016
State Regulated: Yes
Regulatory Agency: WIDNR

Ownership

VILLAGE OF MERRILLAN

Local Government

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Merillan Mills?

Merillan Mills is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Merillan Mills?

Merillan Mills is owned by VILLAGE OF MERRILLAN (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Merillan Mills built?

Merillan Mills was completed in 1907, making it 119 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Merillan Mills?

Merillan Mills serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Merillan Mills?

Merillan Mills has a dam height of 23 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Merillan Mills last inspected?

Merillan Mills was last inspected on July 25, 2016. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.