Mathews Pond Dam 2

TR- SHOAL CREEK W W FORK· Montgomery, Illinois· Built 1974· Earth· 23 ft tall
Low Hazard Irrigation Other Private

Key Takeaway

Mathews Pond Dam 2 is classified as low hazard in Illinois. It was completed in 1974 and is 52 years old. Its primary use is irrigation.

Physical Details

Dam Height 23 ft (taller than 37.7% in IL)
Dam Length400 ft
Dam TypeEarth
Max Storage60 acre-ft
Normal Storage32 acre-ft
Surface Area6 acres
Drainage Area0 sq mi
Max Discharge237 cfs
Year Completed1974 (52 years old)
NID IDIL40117

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: May 30, 2017
State Regulated: Yes
Regulatory Agency: IDNR

Ownership

PHIL MATTHEWS;PHIL MATTHEWS

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Mathews Pond Dam 2?

Mathews Pond Dam 2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Mathews Pond Dam 2?

Mathews Pond Dam 2 is owned by PHIL MATTHEWS;PHIL MATTHEWS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Mathews Pond Dam 2 built?

Mathews Pond Dam 2 was completed in 1974, making it 52 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Mathews Pond Dam 2?

Mathews Pond Dam 2 serves the following purposes: Irrigation, Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Mathews Pond Dam 2?

Mathews Pond Dam 2 has a dam height of 23 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Mathews Pond Dam 2 last inspected?

Mathews Pond Dam 2 was last inspected on May 30, 2017. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.