Lemke Dam
Key Takeaway
Lemke Dam is classified as low hazard in Iowa. It was completed in 1969 and is 57 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 28 ft (taller than 36.9% in IA) |
| Dam Length | 600 ft |
| Dam Type | Earth |
| Max Storage | 297 acre-ft |
| Normal Storage | 233 acre-ft |
| Surface Area | 30 acres |
| Drainage Area | 1 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1969 (57 years old) |
| NID ID | IA00031 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Louis Lemke
Private
Nearby Dams
Lemke Dam
Adair, IA
Low Hazard 28 ftStroburg Dam
Adair, IA
Low Hazard 33 ftLinn Dam
Adair, IA
Low Hazard 27 ftHaines Dam
Adair, IA
Low Hazard 23 ftCasey Mill and Elevator Ia-57-148
Guthrie, IA
Low Hazard 23 ftBaudler Dam
Adair, IA
Low Hazard 29 ftNeumann & Hunter Dam
Adair, IA
Low Hazard 26 ftGrubbs Dam
Adair, IA
Low Hazard 25 ftFrequently Asked Questions
What is the hazard classification of Lemke Dam?
Lemke Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Lemke Dam?
Lemke Dam is owned by Louis Lemke (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Lemke Dam built?
Lemke Dam was completed in 1969, making it 57 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Lemke Dam?
Lemke Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Lemke Dam?
Lemke Dam has a dam height of 28 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.