Lambert & Taylor No 1
Key Takeaway
Lambert & Taylor No 1 is classified as low hazard in Missouri. It was completed in 1992 and is 34 years old. Its primary use is grade stabilization.
Physical Details
| Dam Height | 29 ft (taller than 59.6% in MO) |
| Dam Length | 210 ft |
| Dam Type | Earth |
| Max Storage | 25 acre-ft |
| Normal Storage | 16 acre-ft |
| Surface Area | 1 acres |
| Drainage Area | 64 sq mi |
| Max Discharge | 125 cfs |
| Year Completed | 1992 (34 years old) |
| NID ID | MO50488 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
LAMBERT & TAYLOR
Private
Nearby Dams
East Fork Grand River Dam C- 34
Worth, MO
Low Hazard 32 ftMyer Lake Dam
Worth, MO
Low Hazard 30 ftCottrel Lake Dam
Worth, MO
Low Hazard 26 ftWest Fork Big Creek Watershed Site B-49
Ringgold, IA
Low Hazard 25 ftWest Fork Big Creek Watershed Site B-47
Ringgold, IA
Low Hazard 26 ftEast Fork Grand River Dam F- 26
Worth, MO
Low Hazard 33 ftWest Fork Big Creek Watershed Site B-46
Ringgold, IA
Low Hazard 26 ftWest Fork Big Creek Watershed Site B-45
Ringgold, IA
Low Hazard 22 ftFrequently Asked Questions
What is the hazard classification of Lambert & Taylor No 1?
Lambert & Taylor No 1 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Lambert & Taylor No 1?
Lambert & Taylor No 1 is owned by LAMBERT & TAYLOR (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Lambert & Taylor No 1 built?
Lambert & Taylor No 1 was completed in 1992, making it 34 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Lambert & Taylor No 1?
Lambert & Taylor No 1 serves the following purposes: Grade Stabilization, Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Lambert & Taylor No 1?
Lambert & Taylor No 1 has a dam height of 29 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.