Lake In The Hills 3 Dam

CRYSTAL CREEK· McHenry, Illinois· Built 1940· Concrete· 10 ft tall
Low Hazard Recreation Local Government

Key Takeaway

Lake In The Hills 3 Dam is classified as low hazard in Illinois. It was completed in 1940 and is 86 years old. Its primary use is recreation.

Physical Details

Dam Height 10 ft (taller than 5.7% in IL)
Dam Length70 ft
Dam TypeConcrete
Max Storage70 acre-ft
Normal Storage10 acre-ft
Surface Area10 acres
Drainage Area12 sq mi
Max Discharge1,550 cfs
Year Completed1940 (86 years old)
Year Modified1998
NID IDIL50382

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: November 5, 2019
State Regulated: Yes
Regulatory Agency: IDNR

Ownership

VILLAGE OF LAKE IN THE HILLS

Local Government

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Lake In The Hills 3 Dam?

Lake In The Hills 3 Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Lake In The Hills 3 Dam?

Lake In The Hills 3 Dam is owned by VILLAGE OF LAKE IN THE HILLS (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Lake In The Hills 3 Dam built?

Lake In The Hills 3 Dam was completed in 1940, making it 86 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Lake In The Hills 3 Dam?

Lake In The Hills 3 Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Lake In The Hills 3 Dam?

Lake In The Hills 3 Dam has a dam height of 10 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Lake In The Hills 3 Dam last inspected?

Lake In The Hills 3 Dam was last inspected on November 5, 2019. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.