Kenneth Read Dam
Key Takeaway
Kenneth Read Dam is classified as low hazard in Missouri. It was completed in 2002 and is 24 years old. Its primary use is water supply.
Physical Details
| Dam Height | 19 ft (taller than 6.3% in MO) |
| Dam Length | 487 ft |
| Dam Type | Earth |
| Max Storage | 90 acre-ft |
| Normal Storage | 55 acre-ft |
| Surface Area | 5 acres |
| Drainage Area | 260 sq mi |
| Max Discharge | 13 cfs |
| Year Completed | 2002 (24 years old) |
| NID ID | MO51108 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
KENNETH READ
Private
Nearby Dams
Coy Lake Dam
Adair, MO
Low Hazard 25 ftMcculough Dam
Adair, MO
Low Hazard 30 ftJimmy Williams Dam
Adair, MO
Low Hazard 23 ftJohn Williams Dam
Adair, MO
Low Hazard 23 ftShahan Dam
Adair, MO
Low Hazard 26 ftLarry Hays Dam
Adair, MO
Low Hazard 26 ftCollop Dam
Adair, MO
Low Hazard 30 ftTaylor Dam
Adair, MO
Low Hazard 34 ftFrequently Asked Questions
What is the hazard classification of Kenneth Read Dam?
Kenneth Read Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Kenneth Read Dam?
Kenneth Read Dam is owned by KENNETH READ (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Kenneth Read Dam built?
Kenneth Read Dam was completed in 2002, making it 24 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Kenneth Read Dam?
Kenneth Read Dam serves the following purposes: Water Supply. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Kenneth Read Dam?
Kenneth Read Dam has a dam height of 19 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Kenneth Read Dam last inspected?
Kenneth Read Dam was last inspected on September 1, 2002. Inspection dates indicate when a formal review occurred, not the results of that inspection.