John Robert Dam
Key Takeaway
John Robert Dam is classified as high hazard in New Mexico. It was completed in 1976 and is 50 years old. Its primary use is flood risk reduction. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Height | 60 ft (taller than 77.9% in NM) |
| Dam Length | 1,820 ft |
| Dam Type | Earth |
| Max Storage | 659 acre-ft |
| Normal Storage | 0 acre-ft |
| Surface Area | 25 acres |
| Drainage Area | 10 sq mi |
| Max Discharge | 23,600 cfs |
| Year Completed | 1976 (50 years old) |
| NID ID | NM00406 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
ALBUQUERQUE METRO ARROYO FLOOD CONTROL AUTHORITY
Local Government
Nearby Dams
Pino Dam
Bernalillo, NM
High Hazard 58 ftSouth Domingo Baca Dam
Bernalillo, NM
High Hazard 60 ftNorth Domingo Baca Dam
Bernalillo, NM
High Hazard 34 ftArroyo Del Oso Detention Dam
Bernalillo, NM
High Hazard 38 ftEmbudo Dam
Bernalillo, NM
High Hazard 50 ftKinney Dam
Bernalillo, NM
High Hazard 23 ftSettled Water Storage Dam No. 1
Bernalillo, NM
High Hazard 19 ftSandia Peak Phase 2 Pond
Bernalillo, NM
Low Hazard 28 ftFrequently Asked Questions
What is the hazard classification of John Robert Dam?
John Robert Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates John Robert Dam?
John Robert Dam is owned by ALBUQUERQUE METRO ARROYO FLOOD CONTROL AUTHORITY (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was John Robert Dam built?
John Robert Dam was completed in 1976, making it 50 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of John Robert Dam?
John Robert Dam serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is John Robert Dam?
John Robert Dam has a dam height of 60 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was John Robert Dam last inspected?
John Robert Dam was last inspected on February 10, 2020. Inspection dates indicate when a formal review occurred, not the results of that inspection.