Howard Robertson Dam

MIDDLE FORK MINNEOSA CREEK· Union, New Mexico· Built 1974· Earth· 28 ft tall

Key Takeaway

Howard Robertson Dam is classified as low hazard in New Mexico. It was completed in 1974 and is 52 years old. Its primary use is flood risk reduction.

Physical Details

Dam Height 28 ft (taller than 38.7% in NM)
Dam Length300 ft
Dam TypeEarth
Max Storage63 acre-ft
Normal Storage0 acre-ft
Surface Area6 acres
Drainage Area5 sq mi
Max Discharge3,200 cfs
Year Completed1974 (52 years old)
NID IDNM00430

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: October 23, 2013
State Regulated: Yes
Regulatory Agency: OFFICE OF THE STATE ENGINEER

Ownership

ROBERTSON, H

Private

Frequently Asked Questions

What is the hazard classification of Howard Robertson Dam?

Howard Robertson Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Howard Robertson Dam?

Howard Robertson Dam is owned by ROBERTSON, H (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Howard Robertson Dam built?

Howard Robertson Dam was completed in 1974, making it 52 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Howard Robertson Dam?

Howard Robertson Dam serves the following purposes: Flood Risk Reduction, Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Howard Robertson Dam?

Howard Robertson Dam has a dam height of 28 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Howard Robertson Dam last inspected?

Howard Robertson Dam was last inspected on October 23, 2013. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.