Hines Section 10 Lake Dam
Key Takeaway
Hines Section 10 Lake Dam is classified as high hazard in Missouri. It was completed in 1972 and is 54 years old. Its primary use is irrigation. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Height | 15 ft (taller than 1.7% in MO) |
| Dam Type | Earth |
| Max Storage | 136 acre-ft |
| Normal Storage | 85 acre-ft |
| Surface Area | 17 acres |
| Drainage Area | 270 sq mi |
| Year Completed | 1972 (54 years old) |
| NID ID | MO20064 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
FLOYD HINES
Private
Nearby Dams
Hines Section 3 South Lake Dam
Vernon, MO
Low Hazard 20 ftFloyd Hines Dam
Vernon, MO
Low Hazard 18 ftHines Section 3 North Dam
Vernon, MO
Low Hazard 20 ftBeard Lake Dam
Vernon, MO
Low Hazard 20 ftMononame 636
Vernon, MO
Low Hazard 20 ftCovington Dam
Vernon, MO
Low Hazard 15 ftMononame 310
Vernon, MO
Low Hazard 13 ftMononame 47
Vernon, MO
Low Hazard 12 ftFrequently Asked Questions
What is the hazard classification of Hines Section 10 Lake Dam?
Hines Section 10 Lake Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Hines Section 10 Lake Dam?
Hines Section 10 Lake Dam is owned by FLOYD HINES (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Hines Section 10 Lake Dam built?
Hines Section 10 Lake Dam was completed in 1972, making it 54 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Hines Section 10 Lake Dam?
Hines Section 10 Lake Dam serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Hines Section 10 Lake Dam?
Hines Section 10 Lake Dam has a dam height of 15 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.