Glen Meyer Dam
Key Takeaway
Glen Meyer Dam is classified as low hazard in Missouri. It was completed in 1971 and is 55 years old. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 25 ft (taller than 23.5% in MO) |
| Dam Type | Earth |
| Max Storage | 67 acre-ft |
| Normal Storage | 20 acre-ft |
| Surface Area | 5 acres |
| Drainage Area | 1,150 sq mi |
| Year Completed | 1971 (55 years old) |
| NID ID | MO10449 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
GLEN MEYER
Private
Nearby Dams
Cain Farm Lake Dam
Holt, MO
Low Hazard 25 ftBailey Lake Dam
Holt, MO
Low Hazard 25 ftDudeck Dam
Holt, MO
Low Hazard 29 ftLimpp, Earl Lake Dam
Holt, MO
High Hazard 26 ftGordan Lake Dam
Holt, MO
High Hazard 31 ftFrank Milne Dam (Dry)
Holt, MO
High Hazard 33 ftDysart Lake Dam
Andrew, MO
High Hazard 25 ftCole Lake Dam
Andrew, MO
Low Hazard 25 ftFrequently Asked Questions
What is the hazard classification of Glen Meyer Dam?
Glen Meyer Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Glen Meyer Dam?
Glen Meyer Dam is owned by GLEN MEYER (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Glen Meyer Dam built?
Glen Meyer Dam was completed in 1971, making it 55 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Glen Meyer Dam?
Glen Meyer Dam serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Glen Meyer Dam?
Glen Meyer Dam has a dam height of 25 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.