George Craig Dam
Key Takeaway
George Craig Dam is classified as low hazard in Missouri. It was completed in 2004 and is 22 years old. Its primary use is grade stabilization.
Physical Details
| Dam Height | 29 ft (taller than 59.6% in MO) |
| Dam Length | 343 ft |
| Dam Type | Earth |
| Max Storage | 45 acre-ft |
| Normal Storage | 27 acre-ft |
| Surface Area | 2 acres |
| Drainage Area | 38 sq mi |
| Max Discharge | 114 cfs |
| Year Completed | 2004 (22 years old) |
| NID ID | MO51211 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
GEORGE CRAIG
Private
Nearby Dams
West Fork Big Creek Dam B-104
Harrison, MO
Low Hazard 24 ftWest Fork Big Creek Dam B-105
Harrison, MO
Low Hazard 35 ftCraig Lake Dam
Harrison, MO
Low Hazard 32 ftWest Fork Big Creek Dam B-106
Harrison, MO
Low Hazard 27 ftGeorge Craig
Harrison, MO
Low Hazard 30 ftEast Fork Big Creek Dam E- 70
Harrison, MO
Low Hazard 25 ftWest Fork Big Creek Dam B-107
Harrison, MO
Low Hazard 22 ftEast Fork Big Creek Dam Lt- 4
Harrison, MO
Low Hazard 30 ftFrequently Asked Questions
What is the hazard classification of George Craig Dam?
George Craig Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates George Craig Dam?
George Craig Dam is owned by GEORGE CRAIG (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was George Craig Dam built?
George Craig Dam was completed in 2004, making it 22 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of George Craig Dam?
George Craig Dam serves the following purposes: Grade Stabilization. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is George Craig Dam?
George Craig Dam has a dam height of 29 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was George Craig Dam last inspected?
George Craig Dam was last inspected on June 3, 2004. Inspection dates indicate when a formal review occurred, not the results of that inspection.