George Balle Structure Dam
Key Takeaway
George Balle Structure Dam is classified as low hazard in Missouri. It was completed in 1964 and is 62 years old. Its primary use is grade stabilization.
Physical Details
| Dam Height | 29 ft (taller than 59.6% in MO) |
| Dam Length | 380 ft |
| Dam Type | Earth |
| Max Storage | 19 acre-ft |
| Normal Storage | 11 acre-ft |
| Surface Area | 23 acres |
| Drainage Area | 307 sq mi |
| Max Discharge | 210 cfs |
| Year Completed | 1964 (62 years old) |
| NID ID | MO50389 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
GEORGE BALLE
Private
Nearby Dams
Auffert
Nodaway, MO
Low Hazard 34 ftFelton Dam No. 1
Worth, MO
Low Hazard 30 ftHarry Mullock Dam
Worth, MO
Low Hazard 30 ftSchmitz Brothers Lake Dam
Nodaway, MO
Low Hazard 26 ftPlatte River Trib Watershed Dam 5-B
Worth, MO
Low Hazard 34 ftSara Or Bill Baldwin Structure Dam
Nodaway, MO
Low Hazard 26 ftPlatte River Trib Watershed Dam 7-B
Worth, MO
Low Hazard 30 ftDeefreece
Nodaway, MO
Low Hazard 31 ftFrequently Asked Questions
What is the hazard classification of George Balle Structure Dam?
George Balle Structure Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates George Balle Structure Dam?
George Balle Structure Dam is owned by GEORGE BALLE (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was George Balle Structure Dam built?
George Balle Structure Dam was completed in 1964, making it 62 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of George Balle Structure Dam?
George Balle Structure Dam serves the following purposes: Grade Stabilization. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is George Balle Structure Dam?
George Balle Structure Dam has a dam height of 29 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was George Balle Structure Dam last inspected?
George Balle Structure Dam was last inspected on March 27, 1981. Inspection dates indicate when a formal review occurred, not the results of that inspection.