Frette Dam
Key Takeaway
Frette Dam is classified as low hazard in Iowa. It was completed in 1990 and is 36 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 32 ft (taller than 58.4% in IA) |
| Dam Length | 175 ft |
| Dam Type | Earth |
| Max Storage | 23 acre-ft |
| Normal Storage | 11 acre-ft |
| Surface Area | 2 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1990 (36 years old) |
| NID ID | IA02510 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Mark Frette
Private
Nearby Dams
Cook Dam
Dallas, IA
Low Hazard 31 ftRedfield Dam
Dallas, IA
Low Hazard 9 ftArnburg Dam
Dallas, IA
Low Hazard 35 ftMartin Dam
Dallas, IA
Low Hazard 27 ftFreestone Dam
Dallas, IA
Low Hazard 36 ftMidwest Oilseeds Dam
Dallas, IA
Low Hazard 51 ftGlissman Dam
Dallas, IA
Low Hazard 37 ftBeaver Lake Dam
Dallas, IA
Significant Hazard 43 ftFrequently Asked Questions
What is the hazard classification of Frette Dam?
Frette Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Frette Dam?
Frette Dam is owned by Mark Frette (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Frette Dam built?
Frette Dam was completed in 1990, making it 36 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Frette Dam?
Frette Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Frette Dam?
Frette Dam has a dam height of 32 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.