Don Nail
Key Takeaway
Don Nail is classified as low hazard in Missouri. It was completed in 1996 and is 30 years old. Its primary use is grade stabilization.
Physical Details
| Dam Height | 33 ft (taller than 79.3% in MO) |
| Dam Length | 228 ft |
| Dam Type | Earth |
| Max Storage | 69 acre-ft |
| Normal Storage | 18 acre-ft |
| Surface Area | 3 acres |
| Drainage Area | 128 sq mi |
| Max Discharge | 246 cfs |
| Year Completed | 1996 (30 years old) |
| NID ID | MO50833 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
DON NAIL
Private
Nearby Dams
Hedges Lake Dam
Ray, MO
High Hazard 43 ftLake Doniphan Dam-Lower
Ray, MO
High Hazard 30 ftUpper Doniphan Dam
Ray, MO
High Hazard 22 ftMaurer Lake Dam
Clay, MO
Low Hazard 20 ftGibson-Oyler Lake Dam
Ray, MO
Significant Hazard 28 ftTurner Lake Dam
Clay, MO
Low Hazard 34 ftSibley Orchards Lake Dam
Jackson, MO
High Hazard 25 ftSaint Stephens Lake Dam
Ray, MO
Low Hazard 30 ftFrequently Asked Questions
What is the hazard classification of Don Nail?
Don Nail is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Don Nail?
Don Nail is owned by DON NAIL (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Don Nail built?
Don Nail was completed in 1996, making it 30 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Don Nail?
Don Nail serves the following purposes: Grade Stabilization. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Don Nail?
Don Nail has a dam height of 33 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.